Call 08048763170 88% Response Rate

Send Email

Gas Filters

Use of compressed air as a source of energy is increasing day by day due to safety and ease of use. At the same time, it is becoming imperative that the compressed air is clean and oil and odor free. We offer a wide range of filters for this application. We have pre-filters Sintered Bronze, Porous Plastic or Ceramic filter element, Fine Filter using boro-silicate fibre glass down to 0.01 micron and less than 0.01 ppm of oil carry over and Activated Carbon filter for odor and vapor removal for less than 0.001 ppm of oil carry over. Our compressed air filters have very low pressure drops hence saving energy for our customers.

Similar to compressed air filter, we can offer compressed gas filters. With increasing needs of getting cleaner gases for their process, has made us develop a range of gas filters for this application. Starting from simple conical strainers and going on to more sophisticated media like borosilicate fiber glass reduces contaminants of particulates as well oil vapor carry over. The gas filters are made for low pressure drop applications by increasing filtration area by pleating.

We can offer aluminum housings for small flows and pressures upto 10 bar and for higher flows and higher pressure, we offer filter housings of Carbon Steel or Stainless Steel. The pressure vessels are built to ASME standards and we can offer “U” stamped vessels, also if required.

Some of the applications are:

  • Protection of nozzles
  • Protection of meters for natural gas.
  • Preventing product contamination
  • Back flushing of filters.
  • Instrumentation air
Cartridge Gas Filters
  • Cartridge Gas Filters
  • Cartridge Gas Filters
  • Cartridge Gas Filters
  • Cartridge Gas Filters
  • Cartridge Gas Filters
  • Cartridge Gas Filters
  • Cartridge Gas Filters
  • Cartridge Gas Filters
  • Cartridge Gas Filters
  • Cartridge Gas Filters
  • Cartridge Gas Filters
  • Cartridge Gas Filters
  • Cartridge Gas Filters

Cartridge Gas Filters

Product Price: Rs 10,000 / PieceGet Best Price

Product Details:
Usage/ApplicationNatural Gas
BrandGuru
Filter TypeCartridge Filter
MaterialMS,SS,Aluminum
Operating Pressure0 to 50 Bar
Flow RateUp to 80,000 M3/Hr.
Line Size1/4" NB to 30" NB
Filtration Rating0.01 Micron to 6000 Micron
We offer Cartridge Gas Filters with range of removal dirt, dust, rust, condensate, moisture content, exhaust fumes and oil impurities. We design gas filter with various parameters of compressed air like flow rate, line size, operating pressure, Operating Temperature and Filtration Rating. We offer gas filter with Aluminium, CS and SS housings. Gas filter elements made of various filter medias like paper, synthetic, polyester, pp, coalescing, borosilicate glass fibre, activated carbon, non-woven, stainless steel wire mesh, sintered bronze, sintered wire mesh and sintered powder. We also offer scrubber system for moisture separation from gas.

Gas filters classified under below categories:
  • MS – Moisture Separator
  • For the removal of 99% of bulk oil/water removal from the compressed gas.
  • SB – Pre Filtration
  • Sintered bronze filter elements for removal of pipe scales, bulk liquid, solid p[articles, dust down 5 micron. This filter elements available in 5, 10, 25 and above microns.
  • PF – High Efficiency Fine Filter
  • For the removal of particles down to 1 micron including coalesced liquid water and oil, dust, providing a maximum remaining oil aerosol content of 0.5 mg/m³ at 21 °C.
  • UF – High Efficiency Oil Removal Filtration
  • For the removal of particles down to 0.01 micron including oil aerosols, dust, providing a maximum remaining oil aerosol content of 0.01 mg/m³ (0.01 ppm) at 21 °C efficiency – 99.99% (install in series with filter type PF).
  • Borosilicate glass microfibers – filter media which actively repel oil to reduce pressure drop and running cost to an absolute minimum.
  • AC – Activated Carbon Filtration
  • For the removal of vapour and hydro carbon odours giving a maximum remaining oil content of <0.003 mg/m³ (<0.003 ppm) (excluding methane) at 21 °C (install in series with filter type PF + UF).

Technical Parameters:
  • End Connections: 150# & 300# Flanged, Table E & Table F Flanges, DIN Standard Flanges Butt Weld,
  • NPT/BSP Threaded, Hose Pipe Conn., Tri Clover Adaptor, SMS Union/Dairy Conn.
  • Material of Construction : Aluminium, CS, MS, SS304, SS304L, SS316, SS316L, SS317L
  • Top cover with nut & bolts type or quick opening type

Advantages: 
  • Easy to clean
  • Low Pressure drop
  • Large area
  • Easy to operate and maintenance
  • High dirt load holding capacity

Applications: 
  • Refineries and Petro chemicals
  • Power Plants
  • Oil & Gas
  • Chemical Industries
  • Steel Industries, Metals & Minerals
  • Textile Industries
  • Dairy and Food Industries
  • Dyes, Inks and paints Industries
  • Cement Industries
  • Fertilizers Industries
  • Pharmaceuticals
    Get Best QuoteRequest Callback
    Natural Gas Filters
    • Natural Gas Filters
    • Natural Gas Filters
    • Natural Gas Filters
    • Natural Gas Filters
    • Natural Gas Filters
    • Natural Gas Filters
    • Natural Gas Filters
    • Natural Gas Filters
    • Natural Gas Filters
    • Natural Gas Filters
    • Natural Gas Filters
    • Natural Gas Filters
    • Natural Gas Filters

    Natural Gas Filters

    Product Price: Rs 10,000 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    Filter Mediapaper, synthetic, polyester, pp, coalescing, borosilicate glass fibre, activated carbon, non-woven
    BrandGURU
    Filter TypeCartridge Filter
    Filter Medium MaterialFiberglass
    Size1/4" NB to 30" NB
    Flow Rate2000-3000 m^3/hr
    Usage/ApplicationIndustrial
    Length0-5 inch, 10-15 inch, 5-10 inch
    MaterialAluminium, CS and SS
    Operating Pressure0 to 50 Bar
    Working Temp.Up to 250 Deg. C
    Connection Standard150# & 300# Flanged, Table E & Table F Flanges, DIN Standard Flanges Butt Weld
    We offer Natural Gas Filters with range of removal dirt, dust, rust, condensate, moisture content, exhaust fumes and oil impurities. We design natural gas filter with various parameters of compressed air like flow rate, line size, operating pressure, Operating Temperature, and Filtration Rating. We offer natural gas filter with Aluminium, CS and SS housings. Natural gas filter elements made of various filter medias like paper, synthetic, polyester, pp, coalescing, borosilicate glass fibre, activated carbon, non-woven, stainless steel wire mesh, sintered bronze, sintered wire mesh and sintered powder. We also offer scrubber system for moisture separation from natural gas.

    Gas filters classified under below categories:
    • MS – Moisture Separator
    • For the removal of 99% of bulk oil/water removal from the compressed gas.
    • SB – Pre Filtration
    • Sintered bronze filter elements for removal of pipe scales, bulk liquid, solid p[articles, dust down 5 micron. This filter elements available in 5, 10, 25 and above microns.
    • PF – High Efficiency Fine Filter
    • For the removal of particles down to 1 micron including coalesced liquid water and oil, dust, providing a maximum remaining oil aerosol content of 0.5 mg/m³ at 21 °C.
    • UF – High Efficiency Oil Removal Filtration
    • For the removal of particles down to 0.01 micron including oil aerosols, dust, providing a maximum remaining oil aerosol content of 0.01 mg/m³ (0.01 ppm) at 21 °C efficiency – 99.99% (install in series with filter type PF). [Borosilicate glass microfibers – filter media which actively repel oil to reduce pressure drop and running cost to an absolute minimum.]
    • AC – Activated Carbon Filtration
    • For the removal of vapour and hydro carbon odours giving a maximum remaining oil content of  <0.003 mg/m³ (<0.003 ppm) (excluding methane) at 21 °C (install in series with filter type PF + UF).

    Technical Parameters:
    • End Connections: 150# & 300# Flanged, Table E & Table F Flanges, DIN Standard Flanges Butt Weld
    • NPT/BSP Threaded, Hose Pipe Conn., Tri Clover Adaptor, SMS Union/Dairy Conn.
    • Material of Construction : Aluminium, CS, MS, SS304, SS304L, SS316, SS316L, SS317L
    • Top cover with nut & bolts type or quick opening type

    Advantages: 
    • Easy to clean
    • Low Pressure drop
    • Large area
    • Easy to operate and maintenance
    • High dirt load holding capacity

    Applications: 
    • Refineries and Petro chemicals
    • Power Plants
    • Oil & Gas
    • Chemical Industries
    • Steel Industries, Metals & Minerals
    • Textile Industries
    • Dairy and Food Industries
    • Dyes, Inks and paints Industries
    • Cement Industries
    • Fertilizers Industries
    • Pharmaceuticals


    Additional Information:

    • Production Capacity: 100 Pieces per Month
    • Delivery Time: 2 Weeks
    • Packaging Details: Wooden Box
    Get Best QuoteRequest Callback
    Dry Gas Filter
    • Dry Gas Filter
    • Dry Gas Filter
    • Dry Gas Filter
    • Dry Gas Filter
    • Dry Gas Filter
    • Dry Gas Filter
    • Dry Gas Filter
    • Dry Gas Filter
    • Dry Gas Filter
    • Dry Gas Filter
    • Dry Gas Filter
    • Dry Gas Filter
    • Dry Gas Filter

    Dry Gas Filter

    Product Price: Rs 12,000 / PieceGet Best Price

    Product Details:
    BrandGuru
    Pressure0 to 50 Bar
    Filter TypeCartridge Filter
    Filter MediaGlass Fiber,Wire Mesh,Coalescing Media,Polyester,Synthetic,Wire Mesh,etc
    MaterialAluminium, CS and SS
    Flow RateUp to 80,000 M3/Hr.
    Operating Temperature15 Deg. C to 500 Deg. C
    Surface FinishColor Coated
    We offer Dry Gas Filter with range of removal dirt, dust, rust, condensate, moisture content, exhaust fumes and oil impurities. We design gas filter with various parameters of compressed air like flow rate, line size, operating pressure, Operating Temperature, and Filtration Rating. We offer gas filter with Aluminium, CS and SS housings. Gas filter elements made of various filter medias like paper, synthetic, polyester, pp, coalescing, borosilicate glass fibre, activated carbon, non-woven, stainless steel wire mesh, sintered bronze, sintered wire mesh and sintered powder. We also offer scrubber system for moisture separation from gas.

    Gas filters classified under below categories:
    • MS – Moisture Separator
    • For the removal of 99% of bulk oil/water removal from the compressed gas.
    • SB – Pre Filtration
    • Sintered bronze filter elements for removal of pipe scales, bulk liquid, solid p[articles, dust down 5 micron. This filter elements available in 5, 10, 25 and above microns.
    • PF – High Efficiency Fine Filter
    • For the removal of particles down to 1 micron including coalesced liquid water and oil, dust, providing a maximum remaining oil aerosol content of 0.5 mg/m³ at 21 °C.
    • UF – High Efficiency Oil Removal Filtration
    • For the removal of particles down to 0.01 micron including oil aerosols, dust, providing a maximum remaining oil aerosol content of 0.01 mg/m³ (0.01 ppm) at 21 °C efficiency – 99.99% (install in series with filter type PF). [Borosilicate glass microfibers – filter media which actively repel oil to reduce pressure drop and running cost to an absolute minimum.]
    • AC – Activated Carbon Filtration
    • For the removal of vapour and hydro carbon odours giving a maximum remaining oil content of  <0.003 mg/m³ (<0.003 ppm) (excluding methane) at 21 °C (install in series with filter type PF + UF).

    Technical Parameters:
    • End Connections: 150# & 300# Flanged, Table E & Table F Flanges, DIN Standard Flanges Butt Weld
    • NPT/BSP Threaded, Hose Pipe Conn., Tri Clover Adaptor, SMS Union/Dairy Conn.
    • Material of Construction : Aluminium, CS, MS, SS304, SS304L, SS316, SS316L, SS317L
    • Top cover with nut & bolts type or quick opening type

    Advantages: 
    • Easy to clean
    • Low Pressure drop
    • Large area
    • Easy to operate and maintenance
    • High dirt load holding capacity

    Applications: 
    • Refineries and Petro chemicals
    • Power Plants
    • Oil & Gas
    • Chemical Industries
    • Steel Industries, Metals & Minerals
    • Textile Industries
    • Dairy and Food Industries
    • Dyes, Inks and paints Industries
    • Cement Industries
    • Fertilizers Industries
    • Pharmaceuticals
      Get Best QuoteRequest Callback
      Gas Line Filter
      • Gas Line Filter
      • Gas Line Filter
      • Gas Line Filter
      • Gas Line Filter
      • Gas Line Filter
      • Gas Line Filter
      • Gas Line Filter
      • Gas Line Filter
      • Gas Line Filter
      • Gas Line Filter
      • Gas Line Filter
      • Gas Line Filter
      • Gas Line Filter

      Gas Line Filter

      Product Price: Rs 8,000 / PieceGet Best Price

      Product Details:
      BrandGuru
      Filter TypeCartridge Filter
      Filter MediaGlass Fiber,Wire Mesh,Synthetic,Non Woven,Polyester,Coalescing,etc.
      MaterialMS, SS, Aluminum
      Flow RateUp to 80,000 NM3/Hr.
      Operating Pressure Range0 to 50 Bar
      Line Size1/4" NB to 30" NB
      We offer Gas Line Filter with range of removal dirt, dust, rust, condensate, moisture content, exhaust fumes and oil impurities. We design gas filter with various parameters of compressed air like flow rate, line size, operating pressure, Operating Temperature, and Filtration Rating. We offer gas filter with Aluminium, CS and SS housings. Gas filter elements made of various filter medias like paper, synthetic, polyester, pp, coalescing, borosilicate glass fibre, activated carbon, non-woven, stainless steel wire mesh, sintered bronze, sintered wire mesh and sintered powder. We also offer scrubber system for moisture separation from gas.

      Gas filters classified under below categories:
      • MS – Moisture Separator
      • For the removal of 99% of bulk oil/water removal from the compressed gas.
      • SB – Pre Filtration
      • Sintered bronze filter elements for removal of pipe scales, bulk liquid, solid p[articles, dust down 5 micron. This filter elements available in 5, 10, 25 and above microns.
      • PF – High Efficiency Fine Filter
      • For the removal of particles down to 1 micron including coalesced liquid water and oil, dust, providing a maximum remaining oil aerosol content of 0.5 mg/m³ at 21 °C.
      • UF – High Efficiency Oil Removal Filtration
      • For the removal of particles down to 0.01 micron including oil aerosols, dust, providing a maximum remaining oil aerosol content of 0.01 mg/m³ (0.01 ppm) at 21 °C efficiency – 99.99% (install in series with filter type PF). [Borosilicate glass microfibers – filter media which actively repel oil to reduce pressure drop and running cost to an absolute minimum.]
      • AC – Activated Carbon Filtration
      • For the removal of vapour and hydro carbon odours giving a maximum remaining oil content of  <0.003 mg/m³ (<0.003 ppm) (excluding methane) at 21 °C (install in series with filter type PF + UF).

      Technical Parameters:
      • End Connections: 150# & 300# Flanged, Table E & Table F Flanges, DIN Standard Flanges Butt Weld
      • NPT/BSP Threaded, Hose Pipe Conn., Tri Clover Adaptor, SMS Union/Dairy Conn.
      • Material of Construction : Aluminium, CS, MS, SS304, SS304L, SS316, SS316L, SS317L
      • Top cover with nut & bolts type or quick opening type

      Advantages: 
      • Easy to clean
      • Low Pressure drop
      • Large area
      • Easy to operate and maintenance
      • High dirt load holding capacity

      Applications: 
      • Refineries and Petro chemicals
      • Power Plants
      • Oil & Gas
      • Chemical Industries
      • Steel Industries, Metals & Minerals
      • Textile Industries
      • Dairy and Food Industries
      • Dyes, Inks and paints Industries
      • Cement Industries
      • Fertilizers Industries
      • Pharmaceuticals
        Get Best QuoteRequest Callback
        Nitrogen Gas Filter
        • Nitrogen Gas Filter
        • Nitrogen Gas Filter
        • Nitrogen Gas Filter
        • Nitrogen Gas Filter
        • Nitrogen Gas Filter
        • Nitrogen Gas Filter
        • Nitrogen Gas Filter
        • Nitrogen Gas Filter
        • Nitrogen Gas Filter
        • Nitrogen Gas Filter
        • Nitrogen Gas Filter
        • Nitrogen Gas Filter
        • Nitrogen Gas Filter

        Nitrogen Gas Filter

        Product Price: Rs 12,000 / PieceGet Best Price

        Product Details:
        BrandGuru
        Filter TypeCartridge Filter
        Flow RateUp to 80,000 NM3/Hr.
        Usage/ApplicationIndustrial
        MaterialAluminium, CS and SS
        Filtration Rating0.01 Micron to 6000 Micron
        Line Size1/4" NB to 30" NB
        We offer Nitrogen Gas Filter with range of removal dirt, dust, rust, condensate, moisture content, exhaust fumes and oil impurities. We design gas filter with various parameters of compressed air like flow rate, line size, operating pressure, Operating Temperature, and Filtration Rating. We offer gas filter with Aluminium, CS and SS housings. Gas filter elements made of various filter medias like paper, synthetic, polyester, pp, coalescing, borosilicate glass fibre, activated carbon, non-woven, stainless steel wire mesh, sintered bronze, sintered wire mesh and sintered powder. We also offer scrubber system for moisture separation from gas.

        Gas filters classified under below categories:
        • MS – Moisture Separator
        • For the removal of 99% of bulk oil/water removal from the compressed gas.
        • SB – Pre Filtration
        • Sintered bronze filter elements for removal of pipe scales, bulk liquid, solid p[articles, dust down 5 micron. This filter elements available in 5, 10, 25 and above microns.
        • PF – High Efficiency Fine Filter
        • For the removal of particles down to 1 micron including coalesced liquid water and oil, dust, providing a maximum remaining oil aerosol content of 0.5 mg/m³ at 21 °C.
        • UF – High Efficiency Oil Removal Filtration
        • For the removal of particles down to 0.01 micron including oil aerosols, dust, providing a maximum remaining oil aerosol content of 0.01 mg/m³ (0.01 ppm) at 21 °C efficiency – 99.99% (install in series with filter type PF). [Borosilicate glass microfibers – filter media which actively repel oil to reduce pressure drop and running cost to an absolute minimum.]
        • AC – Activated Carbon Filtration
        • For the removal of vapour and hydro carbon odours giving a maximum remaining oil content of  <0.003 mg/m³ (<0.003 ppm) (excluding methane) at 21 °C (install in series with filter type PF + UF).

        Technical Parameters:
        • End Connections: 150# & 300# Flanged, Table E & Table F Flanges, DIN Standard Flanges Butt Weld,
        • NPT/BSP Threaded, Hose Pipe Conn., Tri Clover Adaptor, SMS Union/Dairy Conn.
        • Material of Construction : Aluminium, CS, MS, SS304, SS304L, SS316, SS316L, SS317L
        • Top cover with nut & bolts type or quick opening type

        Advantages: 
        • Easy to clean
        • Low Pressure drop
        • Large area
        • Easy to operate and maintenance
        • High dirt load holding capacity

        Applications: 
        • Refineries and Petro chemicals
        • Power Plants
        • Oil & Gas
        • Chemical Industries
        • Steel Industries, Metals & Minerals
        • Textile Industries
        • Dairy and Food Industries
        • Dyes, Inks and paints Industries
        • Cement Industries
        • Fertilizers Industries
        • Pharmaceuticals
        Get Best QuoteRequest Callback

        EXPLORE MORE CATEGORIES

        Looking For "Gas Filters"?
        Thank youYour Enquiry has been sent successfully.
        © GTS Filters And Systems (India) Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.